Application of ceiling sandwich panel
Roof and wall covering of sheds and warehouses and silos
Construction of sheds and prefabricated buildings
Construction of fixed and mobile cold storages
Construction of clean rooms
Indoor sports halls
Types of partitioning
Agricultural buildings
Construction of containers and transport buildings
Storage buildings
Industrial buildings and processing plants
Mahan cooling breeze ceiling sandwich panel
The roof sandwich panel consists of two layers of sheets with foam injected between them, which is usually made of polyurethane. which establishes adhesion with pre-painted upper and lower sheets of (alozinc (zinc and aluminum), galvanized and aluminum) with different thicknesses by means of several microns of primer.
Insulation foam can be made of polystyrene (density 20±2), rock wool (density 120±2), hard XPS (density 40±2) or hard polyurethane (density 40±2), which usually uses polyurethane foam for standard sandwich panels. It is the best type of foam in terms of strength and resistance.
This sandwich panel is resistant to the growth of plants, fungi and has a low thermal conductivity coefficient and high thermal resistance. The main advantages of polyurethane foam are its insulation against heat and cold, sound insulation and resistance to moisture. Being against burning (slow burning / non-flammability) which is present in the roof sandwich panel.
Advantages of ceiling sandwich panels
Considerable load pressure tolerance
Heat insulation against cold and heat
Sound insulation
light weight
Insulation against moisture
Fire resistant
Earthquake Resistant
Speed and precision in construction
Increasing the useful life of buildings and facilities
Ability to recycle consumables
Easy transportation
Washable and hygienic
Economically justified
UV insulation
Resistant to insects
Resistant to chemicals
The property of not absorbing water
Resistant to rust (due to zinc coating)
Wind resistant
Eco-friendly
Suitable for all climatic conditions of Iran, including dry and desert, Sharjah, temperate and mountainous
width
1.05 m (overlap 8 cm) useful width 97 cm
Length with trapezoid shadowline design
1 to 12.35 meters as desired by the customer
thickness
4, 5, 10 cm
Foam type
1- Polyurethane (PIR/PUR1) with density (40±2)
2- Environmentally friendly (no ozone-destroying gases and greenhouse gases)
3- Low flammability (according to DIN4102 standard)
4- Low moisture absorption rate (according to ASTMD570 standard)
Sheet type
Aluzinc sheet (zinc and aluminum) galvanized and pre-painted aluminum, oven polyester with a thickness of 5/. to 7/. mm and color 25µ top
Types of ceiling sandwich panels
- double sheet
- One side of sheet, one side of foil
- One side sheet, one side nylon
- One side of the sheet, one side of the paper
- double foil
بدون دیدگاه